Solved WDS - create capture image

---

Hi, I setup my WDS server and added the Boot image and Install Image from my Windows 10 Pro ISO (boot.wim and install.wim). I then tried to create a "Capture Image" from the Boot Image I created. It finishes successfully but when I go to Boot Image folder in WDS, the name I gave my Capture Image does not appear, just the Boot Image I created. I've tried 5 times and the Capture Image Name will not appear in WDS. Any idea what I could be doing wrong?

@Steven-Doan,

Just to make sure I'm on the same page as you. When you created the captured image in the Create Capture Image Wizard, after setting the image name, description and location and file name...on the next screen did you Check Mark the Add image to Windows Deployment Server now?

If you didn't, check path where you typed in the location and file name. Verify the image is there. If it is you can add it back to where it needs to be on the WDS server.

Let me know.

Also check your logs and verify it's not throwing any event logs at you that indicate something in error has happened. You should only see the successful completion of tasks. If errors or warnings are reported. please let me know what they may be.

Thanks Ronnie, that was the problem. I checked the box and now I see capture image in my boot image folder and when I pxe boot my reference computer.

@Steven-Doan,

Cool, great troubleshooting finding the error!