Solved Why can't I ping outside from BGP iosv-3?

---

iosv-12#ping 192.168.1.5
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.5, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 6/7/9 ms
iosv-12#tr
iosv-12#traceroute 192.168.1.5
Type escape sequence to abort.
Tracing the route to 192.168.1.5
VRF info: (vrf in name/id, vrf out name/id)
1 192.168.35.1 5 msec 5 msec 3 msec
2 192.168.34.1 6 msec 5 msec 6 msec
3 192.168.33.1 7 msec 10 msec 6 msec
4 172.16.1.1 6 msec 8 msec 5 msec
5 192.168.1.5 4 msec 4 msec 6 msec
iosv-12#

iosv-13#ping 192.168.1.5
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.5, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 7/10/13 ms
iosv-13#
iosv-13#tr
iosv-13#traceroute 192.168.1.5
Type escape sequence to abort.
Tracing the route to 192.168.1.5
VRF info: (vrf in name/id, vrf out name/id)
1 172.16.19.1 3 msec 4 msec 3 msec
2 172.16.18.1 4 msec 4 msec 6 msec
3 172.16.17.1 5 msec 6 msec 6 msec
4 172.16.16.1 8 msec 7 msec 6 msec
5 10.23.23.1 10 msec 9 msec 11 msec
6 192.168.32.1 12 msec 13 msec 14 msec
7 172.16.1.1 12 msec 11 msec 9 msec
8 192.168.1.5 9 msec 9 msec 9 msec
iosv-13#

osv-9#ping 192.168.1.5
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.5, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 6/8/9 ms
iosv-9#
iosv-9#
iosv-9#tr
iosv-9#traceroute 192.168.1.5
Type escape sequence to abort.
Tracing the route to 192.168.1.5
VRF info: (vrf in name/id, vrf out name/id)
1 172.16.34.1 3 msec 5 msec 3 msec
2 172.16.33.1 4 msec 5 msec 3 msec
3 172.16.32.1 7 msec 5 msec 8 msec
4 10.23.23.1 8 msec 6 msec 7 msec
5 192.168.32.1 9 msec 9 msec 8 msec
6 172.16.1.1 7 msec 8 msec 10 msec
7 192.168.1.5 6 msec 7 msec 9 msec
iosv-9#

router rip
version 2
redistribute static metric 3
network 192.168.32.0
network 192.168.33.0
default-information originate
no auto-summary
!

ip route 0.0.0.0 0.0.0.0 172.16.1.1

I created the static route and redistributed it in RIP and RIPng

@michael-mckenney,

Please show the traceroute from iosv-3? Trying to figure out where it fails

have you also redistributed rip into BGP?

Thanks?

@ronnie-wong What every you need I will get you, I appreciate your help.

iosv-3#traceroute 192.168.1.5
Type escape sequence to abort.
Tracing the route to 192.168.1.5
VRF info: (vrf in name/id, vrf out name/id)
1 10.23.23.1 5 msec 5 msec 3 msec
2 * * *
3 * * *
4 * * *
5 * * *
6 * * *
7
iosv-3#
iosv-3#
iosv-3#tr
iosv-3#traceroute 192.168.32.1
Type escape sequence to abort.
Tracing the route to 192.168.32.1
VRF info: (vrf in name/id, vrf out name/id)
1 10.23.23.1 4 msec 4 msec 3 msec
2 * * *
3 * * *
4 * * *
5 * * *
6 * * *
7 * * *
8 * * *
9 * *
iosv-3#traceroute 192.168.32.2
Type escape sequence to abort.
Tracing the route to 192.168.32.2
VRF info: (vrf in name/id, vrf out name/id)
1 10.23.23.1 7 msec * 4 msec
iosv-3#

iosv-2#sh run | s router
router rip
version 2
redistribute bgp 2 metric 3 route-map bgp-into-rip
network 192.168.32.0
no auto-summary
router bgp 2
bgp router-id 2.2.2.2
bgp log-neighbor-changes
no bgp default ipv4-unicast
neighbor R3 peer-group
neighbor R3 remote-as 3
neighbor R36 peer-group
neighbor R36 remote-as 3
neighbor 10.23.23.2 peer-group R3
neighbor FD10:23:23::2 peer-group R36
!
address-family ipv4
redistribute rip metric 120
neighbor R3 next-hop-self
neighbor 10.23.23.2 activate
exit-address-family
!
address-family ipv6
redistribute rip RIPng metric 120
neighbor R36 next-hop-self
neighbor FD10:23:23::2 activate
exit-address-family
ipv6 router rip RIPng
redistribute bgp 2 metric 3 route-map bgp-into-rip
iosv-2#

@michael-mckenney,

Alright, progress. The problem is IOSv-2. I won't have time to do much today but your trace route from either side of it is showing it to be the culprit. I have a made a simplified duplication of your topology just using bgp and rip and have the exact same issue. I'm believing it's a redistribution issue....but that's all I can do for now.

I have been looking at iosv-2 because it seems to be the problem. I just can't fi9ure out why. Everything can ping from EIGRP and OSPF to 192.168.1.5 except IOSv-3. I came to the same conclusion about redistribution being the issue. Looks like I followed everything correctly in BGP configuration. I thought about dropping the address-family and going direct to BGP on everything. I know you are busy. Don't worry about it. Thanks for you help.

Friday 8am: Hospital for C-Section
We bought a house today! Doing paperwork and going home tonight to box up stuff.

I fixed it; probably don't need loopback.

add network mask statements on both 2 and 3
network 3.3.3.3 mask 255.255.255.255
network 10.23.23.0 mask 255.255.255.252

ebgp-multihop 2 for peer-group.

iosv-3#sh run | s router
router eigrp 10
default-metric 10000000 1 255 1 1500
network 172.16.32.0 0.0.0.3
redistribute bgp 3 route-map bgp-into-eigrp
redistribute ospf 1
eigrp router-id 3.3.3.3
router ospf 1
router-id 3.3.3.3
redistribute eigrp 10 metric 30 subnets
redistribute bgp 3 subnets route-map bgp-into-ospf
network 172.16.16.0 0.0.0.3 area 0
default-metric 30
router bgp 3
bgp router-id 3.3.3.3
bgp log-neighbor-changes
no bgp default ipv4-unicast
neighbor R2 peer-group
neighbor R2 remote-as 2
neighbor R2 ebgp-multihop 2
neighbor R26 peer-group
neighbor R26 remote-as 2
neighbor 2.2.2.2 peer-group R2
neighbor 10.23.23.1 peer-group R2
neighbor FD10:23:23::1 peer-group R26
!
address-family ipv4
network 3.3.3.3 mask 255.255.255.255
network 10.23.23.0 mask 255.255.255.252
redistribute ospf 1
redistribute eigrp 10
neighbor R2 next-hop-self
neighbor 10.23.23.1 activate
default-metric 30
exit-address-family
!
address-family ipv6
redistribute ospf 1
redistribute eigrp 10
neighbor R26 next-hop-self
neighbor FD10:23:23::1 activate
exit-address-family
ipv6 router eigrp 10
eigrp router-id 3.3.3.3
redistribute bgp 3 route-map bgp-into-eigrp
redistribute ospf 1
default-metric 10000000 1 255 1 1500
ipv6 router ospf 1
router-id 3.3.3.3
default-metric 30
redistribute bgp 3 route-map bgp-into-ospf
redistribute eigrp 10 metric 30
iosv-3#

iosv-3#ping 192.168.1.5
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.5, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 5/6/8 ms
iosv-3#

@michael-mckenney,

wow...great job in finding this! I was still heading for the redistribution issue but glad you eyeballed it!

It made no sense what was missing until I started going through the book on BGP configurations and figuring what was missing. eBGP-multihop is usually the culprit for pings not working. It was putting the network x.x.x.x mask y.y.y.y statements that got it working. BGP configuration with address-family ipv6 and ipv4 break everything up so that it would be easy to miss.

Thank you for all your help.