SCCM and WSUS configuration issue
i am planning to add SUP role on primary site server. while adding it asked me to install WSUS service on same server.
i have installed wsus service on the same server. no the issues is . the wsus server and SCCM managment are using same port which is 8530. and i am not able to start both iis services. as shown in the above pics. to start the wsus service i have to stop Default website iis service which has sccm components.
please help me to resolve this.
Hello @Nagayya-Pujari ,
Did you go through the post-installation tasks after installing WSUS?
When adding WSUS to a SCCM install to create a SUP, you should not launch the post-install configuration for WSUS. You will use SCCM to manage WSUS.
In the site system role wizard, when adding the SUP role, you will specify that WSUS is configured to use 8530 and 8531.
Hope this helps,
after installing role of WSUS it asks for post installation configuration . so should leave it like that ? is what you mean ?.
i should not run the attached step , is what you mean ?
Nagayya,
I hope all is well. Mike was out of the office on Friday, and may not respond to you till he returns, so I thought that I would quickly jump in and answer you in the mean time. The highlighted area above that you are asking about is what Mike was referring to.
DO NOT use the link in the highlighted area to do the post-configuration of WSUS, or you will break the WSUS / SCCM integration and it will not function correctly.
As Mike was indicating, the remaining configuration of WSUS will be done from within the SCCM management interface.
You can go and take a look at the shows in the library that I did on "System Center 2012 Configuration Manager - 70-243" I walk through the complete installation, setup, configuration and management through update deployment of the WSUS and SCCM integration.
Look for the episodes under the title "Deploy applications and software updates".
Please let us know if you have any other questions. Good Luck !!!
Cheers,
Adam
HI ,
after adding WSUS role i have directly installed Software update point in SCCM server. but am getting below errors in log file.
WCM.log
System.Net.WebException: The request failed with HTTP status 404: Not Found.~~ at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber) SMS_WSUS_CONFIGURATION_MANAGER 7/16/2018 9:34:26 AM 6696 (0x1A28)
Remote configuration failed on WSUS Server. SMS_WSUS_CONFIGURATION_MANAGER 7/16/2018 9:34:26 AM 6696 (0x1A28)
Setting new configuration state to 3 (WSUS_CONFIG_FAILED) SMS_WSUS_CONFIGURATION_MANAGER 7/16/2018 9:34:26 AM 6696 (0x1A28)
WSYNCMGR.log
Sync failed: WSUS update source not found on site P01. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource SMS_WSUS_SYNC_MANAGER 7/16/2018 9:34:44 AM 6708 (0x1A34)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=AIBEC2-SCCM.ATTRAGROUP.COM SITE=P01 PID=3276 TID=6708 GMTDATE=Mon Jul 16 04:04:44.506 2018 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site P01. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 7/16/2018 9:34:44 AM 6708 (0x1A34)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER 7/16/2018 9:34:44 AM 6708 (0x1A34)
@nagayya-pujari said in SCCM and WSUS configuration issue:
STATMSG: ID=6703
Nagayya,
I hope all is well. I spoke with Mike and he asked me to respond to you as the troubleshooting aspects of SCCM and WSUS are something that I do quite a bit of, and he thought that I might be able to help you out given the errors that you shared from your log files.
The short answer is that you have a configuration issue, perhaps one or more actually, that are causing these errors and preventing correct initialization and synchronization.
You have two options available to resolve the issue(s), as noted below:
Option 1: Please take a look at the URL provided and read through the possibilities and solutions it discusses:
https://technet.microsoft.com/en-us/library/bb735874.aspx
Option 2: Tear down the SCCM SUP installation by removing the SUP role. Restarting the SCCM server once the role is removed, and then installing the SUP role again, cleanly and correctly. Please see the URL below for the step by step guidance that will help you:
https://docs.microsoft.com/en-us/sccm/sum/get-started/prepare-for-software-updates-management
Please let me know if I can be of any other help, or if you have any questions. Good Luck !!!
Cheers,
Adam
