@rohit-verma said in pathping command 100% packet loss:
Lost/Sent = Pct Lost/Sent = Pct
Source to Here This Node/Link
1 17ms 0/ 100 = 0% 0/ 100 = 0% 18.104.22.168
0/ 100 = 0% |
2 --- 100/ 100 =100% 100/ 100 =100% 22.214.171.124
0/ 100 = 0% |
3 14ms 0/ 100 = 0% 0/ 100 = 0% example(126.96.36.199)
this is a real example excluding destination ip.
could u explain be the difference between Source to Here and Node/Link column?
So, we're missing a piece of information here which is how the pathping was issued:
C:>pathping -n www.itpro.tv
Tracing route to itpro.tv [188.8.131.52]
it begins with a trace route. each line in that trace route then uses the data returned from that traceroute to compute the information you see. This is generally from the public IP address to the destination IP address when it refers to
source to here. When it says
this node/link it is showing from sending device, from my laptop to the destination ip address.
according to my knowledge Node/Link column tells how many packet loss through that hop out of 100.
If there is 100% loss of packet at hop 2 how Node/Link column hop 3 is getting the packet?
*if the post above has answered the question, please mark the topic as solved.
**All "answers" and responses are offered "as is" and my opinion. There is no implied support or guarantee by the ITProTV team.